SreenSplitr: Δείτε το iPhone στον υπολογιστή ή στην TV
Από
argonaytis
, 21/01/2009 01:05
12 μηνύματα σε αυτό το θέμα
#1
Δημοσίευση 21/01/2009 - 01:05
Το ScreenSplitr είναι μία νέα εφαρμογή (διαθέσιμη από το Cydia) η οποία επιτρέπει την μετάδοση της εικόνας του iPhone στην TV ή στην οθόνη του PC (!)
Οδηγίες χρήσης:
Α) Showing ScreenSplitr on the TV
1. Install ScreenSplitr via Cydia
2. Start ScreenSplitr
3. Connect an AV cable (I only tried Component so far)
4. The app will return to the Springboard and ScreenSplitr icon should have a “On” badge.
5. The TV should show what’s on your iPhone.
Β) Showing ScreenSplitr Remote View within Safari
1. Install ScreenSplitr via Cydia
2. Start ScreenSplitr
3. Open Safari (OSX/Windows)
4. Click on Bookmarks/Show All Bookmakrs
5. Select Bonjour
6. Your iPhone should be listed on the right. Double-Click on it
7. Go Back to your iPhone and accept the connection
8. Safari should show your iPhone screen update as you interact with it.
C) EXPERIMENTAL: Showing Remote Control of iPhone within Safari
1. Install ScreenSplitr via Cydia
2. Start ScreenSplitr
3. Open Safari (OSX/Windows)
4. Click on Bookmarks/Show All Bookmakrs
5. Select Bonjour
6. Your iPhone should be listed on the right. Double-Click on it
7. As the ScreenSplitr splash screen shows up, immediatly click on the link “Experimental” at the bottom of the page.
8. Go back to the iPhone and accept the connection.
9. You can now access and control your iPhone from within Safari. Use Ctrl/Cmd-Click to return to SpringBoard.
Εγώ το δοκίμασα με windows και δουλεύει μια χαρά!
FAQ
1. You only need Veency on the iPhone if you’re interested in the Experimental - control the iPhone from the browser. If you only care about TV out or passive viewing of your iPhone screen within Safari, then you can safely remove Veency from your iPhone after you’ve installed ScreenSplitr and it will still work.
2. Some people are asking me if this could work with a usb cable. I think they misread what ScreenSplitr does so the short answer is no. You don’t plug your iPhone to your computer, you connect it to your TV or your WiFi network people!
3. Some people are experiencing problems connecting to the iPhone within Safari. ScreenSplitr is listening on port 8099 for incoming requests (not modifiable right now) so make sure that your PC/Mac doesn’t block that outgoing port. I will make this configurable later. In the meantime, if you can telnet to this port then ScreenSplitr will work (192.168.1.101 is my iPhone local Wifi IP):
Sylvains-Computer:~ sylvain$ telnet 192.168.1.101 8099
Trying 192.168.1.101...
Connected to 192.168.1.101.
Escape character is '^]'.
In general, if you don’t see a pop-up on the iPhone asking if it’s ok to accept an incoming connection, then you have a network problem.
4. Safari is the only browser that I know of with Bonjour built-in. I know that there’s a Bonjour Browser standalone App for OSX out there. If someone knows of a IE or FF add-on, let me know.
5. Experimental mode connects to Veency on port 5900 so make sure that it’s reachable from the PC/Mac. Additionally, a connection on port 8989 is needed for Flash to be granted rights to connect to the iPhone. A telnet to port 5900 should give you this:
Sylvains-Computer:~ sylvain$ telnet 192.168.1.101 5900
Trying 192.168.1.101...
Connected to 192.168.1.101.
Escape character is '^]'.
RFB 003.008
6. Some people are experiencing some weird layout issues on the TV. Play with the NTSC vs PAL mode in the iPod Settings of your iPhone and let me know if that fixes it.
7. Response time will vary depending on your WIFI network speed. Make sure that your PC and iPhone are not far from your Wireless Router/Access Point.
[Via plutinosoft]
Οδηγίες χρήσης:
Α) Showing ScreenSplitr on the TV
1. Install ScreenSplitr via Cydia
2. Start ScreenSplitr
3. Connect an AV cable (I only tried Component so far)
4. The app will return to the Springboard and ScreenSplitr icon should have a “On” badge.
5. The TV should show what’s on your iPhone.
Β) Showing ScreenSplitr Remote View within Safari
1. Install ScreenSplitr via Cydia
2. Start ScreenSplitr
3. Open Safari (OSX/Windows)
4. Click on Bookmarks/Show All Bookmakrs
5. Select Bonjour
6. Your iPhone should be listed on the right. Double-Click on it
7. Go Back to your iPhone and accept the connection
8. Safari should show your iPhone screen update as you interact with it.
C) EXPERIMENTAL: Showing Remote Control of iPhone within Safari
1. Install ScreenSplitr via Cydia
2. Start ScreenSplitr
3. Open Safari (OSX/Windows)
4. Click on Bookmarks/Show All Bookmakrs
5. Select Bonjour
6. Your iPhone should be listed on the right. Double-Click on it
7. As the ScreenSplitr splash screen shows up, immediatly click on the link “Experimental” at the bottom of the page.
8. Go back to the iPhone and accept the connection.
9. You can now access and control your iPhone from within Safari. Use Ctrl/Cmd-Click to return to SpringBoard.
Εγώ το δοκίμασα με windows και δουλεύει μια χαρά!
FAQ
1. You only need Veency on the iPhone if you’re interested in the Experimental - control the iPhone from the browser. If you only care about TV out or passive viewing of your iPhone screen within Safari, then you can safely remove Veency from your iPhone after you’ve installed ScreenSplitr and it will still work.
2. Some people are asking me if this could work with a usb cable. I think they misread what ScreenSplitr does so the short answer is no. You don’t plug your iPhone to your computer, you connect it to your TV or your WiFi network people!
3. Some people are experiencing problems connecting to the iPhone within Safari. ScreenSplitr is listening on port 8099 for incoming requests (not modifiable right now) so make sure that your PC/Mac doesn’t block that outgoing port. I will make this configurable later. In the meantime, if you can telnet to this port then ScreenSplitr will work (192.168.1.101 is my iPhone local Wifi IP):
Sylvains-Computer:~ sylvain$ telnet 192.168.1.101 8099
Trying 192.168.1.101...
Connected to 192.168.1.101.
Escape character is '^]'.
In general, if you don’t see a pop-up on the iPhone asking if it’s ok to accept an incoming connection, then you have a network problem.
4. Safari is the only browser that I know of with Bonjour built-in. I know that there’s a Bonjour Browser standalone App for OSX out there. If someone knows of a IE or FF add-on, let me know.
5. Experimental mode connects to Veency on port 5900 so make sure that it’s reachable from the PC/Mac. Additionally, a connection on port 8989 is needed for Flash to be granted rights to connect to the iPhone. A telnet to port 5900 should give you this:
Sylvains-Computer:~ sylvain$ telnet 192.168.1.101 5900
Trying 192.168.1.101...
Connected to 192.168.1.101.
Escape character is '^]'.
RFB 003.008
6. Some people are experiencing some weird layout issues on the TV. Play with the NTSC vs PAL mode in the iPod Settings of your iPhone and let me know if that fixes it.
7. Response time will vary depending on your WIFI network speed. Make sure that your PC and iPhone are not far from your Wireless Router/Access Point.
[Via plutinosoft]
Ad
#2
Δημοσίευση 22/01/2009 - 16:35
Ωραιο το δοκιμασα στην tv παιζει
#3
Δημοσίευση 10/02/2009 - 19:14
Σε όλες τις versions λειτουργεί; γιατί εγώ το έβαλα και δεν κάνει τίποτα
Edit: Greeklish to Greek
Edit: Greeklish to Greek
#4
Δημοσίευση 10/02/2009 - 19:18
Στην 2.2 δουλεύει κανονικά. Χρειάζεσαι το ειδικό καλώδιο για να δουλέψει
2. Some people are asking me if this could work with a usb cable. I think they misread what ScreenSplitr does so the short answer is no. You don’t plug your iPhone to your computer, you connect it to your TV or your WiFi network people!
2. Some people are asking me if this could work with a usb cable. I think they misread what ScreenSplitr does so the short answer is no. You don’t plug your iPhone to your computer, you connect it to your TV or your WiFi network people!
#5
Δημοσίευση 24/06/2009 - 19:43
γιατι στο bookmark του safari δεν βλεπω το iphone?
στο bonjour bookmarks βασικα.
στο bonjour bookmarks βασικα.
#6
Δημοσίευση 24/06/2009 - 22:51
παιζει στην εκδοση 3???
#8
Δημοσίευση 25/06/2009 - 19:13
το δοκιμασα αλλα τρωει αγριο κολλημα το κινητο, καθε φορα μετα απο μερικα δευτερολεπτα χρησης το κινητο κανει respring σε safe mode
#9
Δημοσίευση 26/06/2009 - 04:53
Quote
το δοκιμασα αλλα τρωει αγριο κολλημα το κινητο, καθε φορα μετα απο μερικα δευτερολεπτα χρησης το κινητο κανει respring σε safe mode
Αυτό συμβαίνει γιατί για να το ελένξεις χρησιμοποιείς το Veency το οποίο δεν παίζει στην 3.0···
#10
Δημοσίευση 26/06/2009 - 11:47
εγω απο την αλλη εχω προβλημα γιατι το καλωδιο μου δεν ειναι official... υπαρχει καμια λυση για αυτο?
#11
Δημοσίευση 26/06/2009 - 11:57
Δυστυχώς όχι... Το γνήσιο έχει τσιπάκι ελέγχου...
#12
Δημοσίευση 26/06/2009 - 12:30
Πριν την αναβάθμιση είχα βρεί μια εφαρμογή η οποία παρέκαμται το chip. Δεν είναι συμβατή με την 3.0...
Απλά περιμένουμε...
Απλά περιμένουμε...
#13
Δημοσίευση 26/06/2009 - 13:53
δοκιμασα αυτο αλλα δεν ειχα αποτελεσματα: http://forums.macrum...0&postcount=238
λογικα χρειαζεται patch το iapd file του os 3.0.....
λογικα χρειαζεται patch το iapd file του os 3.0.....
Χρήστες που διαβάζουν αυτό το θέμα: 5
0 μέλη, 5 επισκέπτες, 0 ανώνυμοι χρήστες